---
title: "Taking a System Snapshot on a Makito X4 Encoder"
url: "https://support.sardius.media/knowledge-base/taking-a-system-snapshot-makito-x4"
category: "Makito Encoder"
updated: 2026-10-08
summary: "A System Snapshot is a full health report of your Haivision Makito X4 encoder, captured in a single text file. If you're working with Sardius Support to troubleshoot a stream, this file gives our team a complete picture of how your encoder is configured and how it's performing, so we can get you…"
---

# Taking a System Snapshot on a Makito X4 Encoder

A **System Snapshot** is a full health report of your Haivision Makito X4 encoder, captured in a single text file. If you're working with Sardius Support to troubleshoot a stream, this file gives our team a complete picture of how your encoder is configured and how it's performing, so we can get you back on air faster.

> **Using a Makito X?** The steps are slightly different. See [Taking a System Snapshot on a Makito X Encoder](https://support.sardius.media/knowledge-base/taking-a-system-snapshot-makito-x).

## What's Included in a Snapshot

The snapshot captures everything our support team typically needs, including:

- Firmware and component versions
- Network settings
- Configured streams and their current status
- Video and audio encoder settings and status checks
- Startup configuration, global settings, and debug logging settings
- Loaded modules, running processes, and system traces
- Last software update log and OS statistics

On the Makito X4, a single snapshot covers **all streams and encoders** on the device, so you only need to generate one, even if you're running multiple outputs.

Generating a snapshot is **read-only**. It does not change your settings or interrupt a live stream.

## Before You Begin

You'll need:

- Access to the Makito X4 web interface (open the encoder's IP address in your browser)
- An admin login for the encoder
- A few minutes for the snapshot to finish generating

## Step 1: Open the Settings Page

Log in to the Makito X4 web interface. You'll land on the **Dashboard**. From the left-hand menu, click **Settings**.

![Click Settings in the left-hand menu](https://support.sardius.media/kb-media/901ca83b68a9efbaaf3c.png)

## Step 2: Click Snapshot

The **Settings** page opens on the **System** tab by default. Here you'll see your encoder's card type, firmware version, uptime, and temperature.

In the top-right corner, click **SNAPSHOT** (between **LOCATE** and **REBOOT**).

![Click Snapshot on the System tab](https://support.sardius.media/kb-media/5f13d3c9ca89cdee4f7e.png)

> **Heads up:** Make sure you click **SNAPSHOT**, not **REBOOT**. Rebooting will interrupt any live streams.

## Step 3: Wait for the Snapshot to Generate

A new browser window or tab opens and displays the progress, for example: _Generating system snapshot (36% Done)._

Leave this window open until it reaches 100%. This usually takes under a minute but can take longer on a busy encoder.

![Snapshot generation progress](https://support.sardius.media/kb-media/6d3f1b0f69a89e37ad59.png)

> **Tip:** If nothing opens, check whether your browser blocked a pop-up and allow pop-ups for the encoder's address.

## Step 4: Review the Snapshot

When complete, the window displays the full report, beginning with **START OF SYSTEM SNAPSHOT**, followed by sections such as Credentials, Local Time, System Up Time, Manufacturing Information, Card Temperature, and System Information.

![Example of a completed system snapshot](https://support.sardius.media/kb-media/731f4425faaf40830ab0.png)

## Step 5: Save the File

Save the snapshot from your browser:

- **Mac:** press **Cmd + S**
- **Windows:** press **Ctrl + S**

Save it as a **.txt** file with a clear name that includes the encoder and date, for example: `MakitoX4-Snapshot-2026-10-03.txt`.

> **Note:** The snapshot contains details about your network and device configuration. Only share it with Sardius Support through your support ticket or the official support email.
