---
title: "Taking a System Snapshot on a Makito X Encoder"
url: "https://support.sardius.media/knowledge-base/taking-a-system-snapshot-makito-x"
category: "Makito Encoder"
updated: 2026-10-05
summary: "A System Snapshot is a full health report of your Haivision Makito X encoder, captured in a single text file. If you're working with Sardius Support to troubleshoot a stream, this file gives our team a complete picture of how your encoder is configured and how it's performing, so we can get you…"
---

# Taking a System Snapshot on a Makito X Encoder

A **System Snapshot** is a full health report of your Haivision Makito X encoder, captured in a single text file. If you're working with Sardius Support to troubleshoot a stream, this file gives our team a complete picture of how your encoder is configured and how it's performing, so we can get you back on air faster.

> **Using a Makito X4?** The steps are slightly different. See [How to Take a System Snapshot on a Makito X4 Encoder](https://support.sardius.media/knowledge-base/taking-a-system-snapshot-makito-x4).

---

## What's Included in a Snapshot

The snapshot captures everything our support team typically needs, including:

- Firmware and component versions
- Network settings
- Configured streams and their current status
- Video and audio encoder settings and status checks
- Startup configuration, global settings, and debug logging settings
- Loaded modules, running processes, and system traces
- Last software update log and OS statistics

Generating a snapshot is **read-only**. It does not change your settings or interrupt a live stream.

## Before You Begin

You'll need:

- Access to the Makito X web interface (open the encoder's IP address in your browser)
- An admin login for the encoder
- A few minutes for the snapshot to finish generating

## Step 1: Open the Settings Page

Log in to the Makito X web interface. From the top navigation bar, click the **gear icon** (Settings).

![Click the gear icon in the top navigation bar](https://support.sardius.media/kb-media/47bff08680272256d396.png)

## Step 2: Click System Snapshot

The **Settings** tab opens on the **Status** page by default. Here you'll see your encoder's card type, firmware version, uptime, and temperature.

In the top-right toolbar, click **System Snapshot**.

![Click System Snapshot on the Status page](https://support.sardius.media/kb-media/fcbc16474108e17be870.png)

## Step 3: Wait for the Snapshot to Generate

A new browser window or tab opens and displays the progress, for example: _Generating system snapshot (9% Done)._

Leave this window open until it reaches 100%. This usually takes under a minute but can take longer on a busy encoder.

![Snapshot generation progress](https://support.sardius.media/kb-media/727111c101f9487951f0.png)

> **Tip:** If nothing opens, check whether your browser blocked a pop-up and allow pop-ups for the encoder's address.

## Step 4: Review the Snapshot

When complete, the window displays the full report, beginning with **START OF SYSTEM SNAPSHOT**, followed by sections such as Credentials, Local Time, System Up Time, Manufacturing Information, Card Temperature, and System Information.

![Example of a completed system snapshot](https://support.sardius.media/kb-media/73c75057b5b082135a47.png)

## Step 5: Save the File

Save the snapshot from your browser:

- **Mac:** press **Cmd + S**
- **Windows:** press **Ctrl + S**

Save it as a **.txt** file with a clear name that includes the encoder and date, for example: `MakitoX-SDI-Snapshot-2026-10-03.txt`.

> **Note:** The snapshot contains details about your network and device configuration. Only share it with Sardius Support through your support ticket or the official support email.
