---
title: "How to set up Sardius Stream with a Makito"
url: "https://support.sardius.media/knowledge-base/how-to-set-up-sardius-stream-with-a-makito"
category: "Makito Encoder"
updated: 2026-09-04
summary: "Overview On this page, we have a guided series of articles to help you set up a Sardius Channel using your Makito encoder. If you would like to skip the video tutorials and review the steps one-by-one, please see the \" Guided Setup Articles \" down below. Video Tutorials Step 1: Pairing a Makito…"
---

# How to set up Sardius Stream with a Makito

### Overview

On this page, we have a guided series of articles to help you set up a Sardius Channel using your Makito encoder. 

If you would like to skip the video tutorials and review the steps one-by-one, please see the "**Guided Setup Articles**" down below.

### Video Tutorials

#### Step 1: Pairing a Makito Encoder

**Video**

> **Transcript:** In this video, we will show you how to pair your Makito X Encoder to your account. Before you begin, make sure that you have two tabs open. One for the Sardius Control Panel and the other for your Makito X Encoder. To begin, select Devices from the Sidebar. Next, click Add Device in the upper right corner. A variety of encoders can be paired with our system. The Makito X is a Haivision encoder, so we will select Haivision to continue. The modal will ask you to sign in to your Makito X. If you haven't already done so, please do so now. Click Next. Now we will need to copy the pairing code. This will copy the code to the clipboard. Now we need to go to our Makito X Encoder. Switch to that tab, and do not close the tab for the Sardius Control Panel. In the Makito, click on the Gear or Settings icon in the upper right corner. Locate Services on the sidebar and click on it. Then find Haivision EMS at the bottom of the screen. Make sure it is toggled on, then click Configure. In the large box, paste the passcode you obtained from the Sardius Control Panel. Click Connect. Allow this process to complete. Once it does, it will show that it is connected to the management service. If it does not connect, your Makito likely needs a DNS entry to continue. Please review our Knowledge Base on how to resolve that. Once you are connected, switch back to the tab with the Sardius Control Panel. Click "Check for Device." This process can take up to 60 seconds, so please do not navigate away. Close the tab, or refresh. When the process is complete, your encoder will be displayed on the screen. Your encoder may have an interesting name. If you would like to change that, simply click on the name of the encoder, enter in a new name, and click the checkmark. Congratulations! Your Makito X encoder is now paired to your account. To learn more about managing your Makito X encoder, or using it to stream, please visit our Knowledge Base. Thank you for watching, and we will see you in the next video.

#### Step 2: Add your Outputs

**Video** (no transcript available)

> **Note:** _**Note:**_  If you would like to create an output that will automate your Facebook or YouTube streaming workflows, see the below articles:
>
> - [Add a Facebook Output](https://support.sardius.media/knowledge-base/add-a-facebook-output)
> - [Add a YouTube Output](https://support.sardius.media/knowledge-base/add-a-youtube-output)

#### Step 3: Create your Channel's default stream settings

**Video** (no transcript available)

### Guided Setup Articles

Each article will open in a separate tab with video and text walkthroughs to help you accomplish each task. At the end of each article, there will be a link to advance to the next step.

1. [Pair a Makito Encoder](https://support.sardius.media/knowledge-base/pair-a-makito-encoder)
2. [Adding an Output](https://support.sardius.media/knowledge-base/add-an-output)
3. [Set up and change your Channel's default stream settings](https://support.sardius.media/knowledge-base/setup-and-change-default-stream-settings)
