---
title: "Apply Build 43 Patch to Your Display Engine"
url: "https://support.sardius.media/knowledge-base/apply-build-43-patch-to-your-display-engine"
category: "DVR Display Engine"
updated: 2026-08-20
summary: "Learn how to apply the Build 43 Patch to your DVR Display Engine."
---

# Apply Build 43 Patch to Your Display Engine

**Video**

> **Transcript:** Welcome fellow Sardius users. In today's tutorial, we are going to guide you through the process Apache your display engine to build 43. Build 43 will be required in order to use the multi-site live DDR through Sardius moving forward. To begin, you're going to need a display engine that is running software version 4.0 or later. A computer on the same network as the display engine, the display engine's IP address, and an SSH compatible command line interface program. What is SSH? SSH is a network protocol that allows you to access your display engine to run scripts, update firmware, and input commands in a secure manner. In order to SSH into your display engine, you will need the following. The display engine's IP address, the username HV root, the password HAI root, and an SSH compatible command line interface program. Just a quick note, if the HV root username and password does not work in your CLI or was otherwise changed, you will need those specific credentials. If you don't know them, you will have to completely reset or field kick the display engine before continuing. Let's start with the SSH. Type in the following command. S.S.H. Base. HV root at the IP address for your display engine. You may see a message like this saying that we can't validate the authenticity of your display engine. We do want to continue, so we'll type in yes. And now we will need to enter the password. In this case, it will be H-A-I-R-O-O-T, all lowercase. If your password is correct, you will see the console UI, just like you see here. The mouse will not work with this UI, so you will have to use the keyboard for the remaining steps. Press the down arrow until you get to the terminal, and then press Enter. On our knowledge base, we will have some commands for you to copy and paste. So we are going to start with this first Ben Bash command. We will copy this here, and we will paste it in this window. This URL that we pasted was a script. But before the script can begin, the UI will ask you if you do want to proceed. To proceed, enter in that password again, H-A-I-R-O-O-T. Again, if this password was changed, you will need the current password. The script will begin. You will see this information here for the two patches that will update your display engine. You will see the High Dash CDBR and the High Dash Madra. To continue the installation, press Y and Enter. And the updates will begin. When you see the word complete, this stage is done, and we will need to move on to the next step. So now we need the command shown here, the system CTL restart mantra. We will copy this, Return to our CLI, paste the command, and run that. It is once again going to ask us to validate this command by entering our password. Authentication is complete and the Madras service has been restarted. We'll do Control X to cancel. And we are actually done so we could log out if we wanted to. But I am just going to go ahead and reboot the device. Once it restarts, I can go to my web browser and go to the IP for the display engine. You'll notice that the High Vision logo has been replaced with the Sardius Media logo. I will log into the unit. And also I see that the Starius Media logo has changed up here as well. Seeing these logos means that the patching process was successful. You can now proceed to the next steps by updating your Kula byte and the display engine with the new URLs provided to you by Sardius. If you have any questions, contact the Sardius support team. We'll see you in the next video.

This article will guide you through the process of patching your Display Engine to Build 43. Build 43 is required in order to use Multi-Site Live DVR through Sardius.

### **Requirements:**

- Display Engine running software version 4.8.0 or later.
- A computer on the same network as the Display Engine
- The Display Engine's IP Address
- SSH-compatible Command Line Interface (CLI) Program
  - _Mac_: Terminal
  - _Windows_: Solar PuTTY

#### **What is SSH?**

SSH is a network protocol that allows you to access your Display Engine to run scripts, update firmware, and input commands in a secure manner.

To successfully SSH into your Display Engine, you will need the following:

- The Display Engine's IP address
- _Username_: hvroot
- _Password_: hairoot
- SSH-compatible Command Line Interface (CLI) Program

> **Note:** _**Note:**_ If the username and/or password listed above does not work in your CLI or was otherwise changed, you will need those credentials. If you do not know them, you will have to [**completely reset (field kick**\*\*)\*\*](https://support.sardius.media/knowledge-base/fieldkick-display-engine-from-4-0-up-to-4-8) the Display Engine before continuing.

#### **Access the Display Engine via SSH**

Open your SSH CLI Program.

Type in the following command. Be sure to replace x.x.x.x with the actual IP Address for your Display Engine. 

ssh <hvroot@x.x.x.x>

You may be prompted with a message stating that the authenticity of the host can't be established. This is an expected message, and there's nothing to be concerned about. Type in "yes" to proceed.

![dvrPatchSsh](https://support.sardius.media/kb-media/f7540824387ead52.png)

You will then be prompted for a password. Enter the one shown above, or the one your system administrator changed it to. You will not see the password as you type it. 

If your password is correct, you will see the Console UI.

![dvrPatchConsole](https://support.sardius.media/kb-media/64471efe4ef2d234.png)

#### **Patching the Display Engine**

Only the keyboard will work in this screen. Use the down arrow to move the selection bar to "Terminal" and press Enter.

![dvrPatchConsoleTerminal](https://support.sardius.media/kb-media/97222293ecfcf1ca.png)

Copy the following command and paste it into the Console UI Terminal window. 

> **Note:** /bin/bash -c "$(curl -fsSL <https://raw.githubusercontent.com/SardiusMedia/device-manager-scripts/main/scripts/dvrConnect/install.sh>)"

This will execute a script that will download the patches to the display engine and kick off the update process.

BBefore the script will begin, the Console UI will ask provide an alert and ask you to proceed. Enter the password in order to continue.

![dvrPatch1](https://support.sardius.media/kb-media/9ee26722815ca632.png)

The script will run, and show you that two packages will be installed:

- hai-cdvr
- hai-madra

![dvrPatch2](https://support.sardius.media/kb-media/53b1de2c9e38586f.png)

The Console UI Terminal will ask you if it is okay to proceed. Type y to continue the installation.

When complete, your screen will look like this:

![dvrPatch3](https://support.sardius.media/kb-media/61f37fabb4b33859.png)

Copy the following command and paste it into the Console UI Terminal window.

systemctl restart madra

You will be prompted to enter the password for root. This will be the same password as listed above, or it will be the password it was changed to by your system administrator.

Once the password is accepted, this command will restart the madra service on the Display Engine. Type Control+X to close the Console UI Terminal window.

You can use the down arrow to select "Reboot/Shutdown" to restart the Display Engine if you like. Otherwise, you can close your SSH CLI program.

**_Congratulations!_** You have successfully patched your Display Engine to Build 43. It is now time to [update your Kulabyte](https://support.sardius.media/knowledge-base/update-kulabyte-for-streaming-to-patched-display-engine) with a new transmission URL.

**_If at any time you require assistance, please reach out to Sardius Support._**
